Contact : +44 1865 922550 / +46 31 30 88 200

/

e-mail : info@thetoolhub.com

Our Guides

  • Standex Engraving Draft Angles

    Standex Engraving Draft Angles

    One of the texture suppliers that we often use is Standex. They make and apply […]


  • TTH sponsors hospitals and schools

    TTH sponsors hospitals and schools

    As part of The Tool Hub Corporate Social Responsibility Policy a part of the profits […]


  • The Light guide tool

    Please click on the image below to download our short introduction to challenges when manufacturing […]


  • Efficient Cooling

    Efficient Cooling

    Download our 5 step quick guide to efficient cooling by clicking the image below.


  • PUR-Foaming

    PUR-Foaming

    There are basically 3 methods for PUR foaming. RIM-process (reaction injection moulding) polyurethane is foamed […]


  • Turbulent Cooling

    Turbulent Cooling

    Injection moulding process is cyclic in characteristic. Cooling time is about 50 to 75% of […]


  • Our Processes

    Click on the image below to download out process description.


  • Steel grades

    Steel grades

    A more detailed look at some of our steel grades and their characteristics. Steel Grade […]


  • Rail transport from China

    Rail transport from China

    At The Tool Hub we can now offer 3 modes of transportation Air, Rail and […]


  • Calculating Air Freight

    Calculating Air Freight

    Air freight is a common mode of transport for plastic products. It’s fast, simple and […]


  • Marking plastic products

    Marking plastic products

    The marking of components manufactured from plastics, rubbers and thermoplastic elastomers is one aspect of […]


  • Threads for cooling connectors

    Threads for cooling connectors

    Selecting the right cooling connectors can be tricky and most companies stick to previously tested […]


  • Submarine gate with Polycarbonate

    Submarine gate with Polycarbonate

    There are a few things to take in to consideration when trying to use a […]


  • Dovetail Collapsing Core

    Dovetail Collapsing Core

    Working with undercuts and the demolding thereof is one of our daily challenges at The […]


  • Pressure Loss Analysis In Injection Molding

    Pressure Loss Analysis In Injection Molding

    Understanding the pressure requirements to fill and pack a part is a key to developing […]


  • Importing plastic parts and samples

    Importing plastic parts and samples

    Importing plastic products and samples from China is far from complicated or expensive. The CPC […]


  • Accelerated ejectors

    Accelerated ejectors

    There are many ways to achieve an accelerated ejector pin movement, but for its simplicity […]


  • Conformal cooling with TempFlex

    Conformal cooling with TempFlex

    A new solution for conformal cooling is available in the HASCO TempFlex. [ut_blockquote_left] No deep-hole […]


  • CoolCross for improved cooling

    CoolCross for improved cooling

    A recent product development from HASCO, the Z99 CoolCross is making routing of cooling channels […]


  • Draft angles for VDI surfaces

    Draft angles for VDI surfaces

      VDI Ra Rz, DA-PA DA-PC DA-ABS 12 0,40 1,5 0 1,0 0,5 15 0,56 […]


  • Electric valve gate systems

    Electric valve gate systems

    At The Tool Hub we constantly see new technology in the industry and one that […]


  • Gating for clear Polycarbonate

    Gating for clear Polycarbonate

    There are many factors to consider when you are trying to get a cosmetically correct […]


  • Evaluate your gate balance

    Evaluate your gate balance

    First step is to check the physical size of each gate through a dimensional report. […]


  • 2K – Design for success

    2K – Design for success

    Part and Mold Design for optimal 2K success. Part Design Basics •The wall thickness of […]


  • Eliminating Bubbles in plastic parts

    Eliminating Bubbles in plastic parts

    Bubbles in plastic parts is one of the most common defects and it can be […]


  • Perfect Threads In Plastic

    Perfect Threads In Plastic

    Getting that perfect thread in a moulded plastic part takes some skills and know how. […]


  • Get the polish level you need

    Get the polish level you need

    Getting to the desired surface quality takes time patience and know how. It should be […]


  • Modern mould cooling with DMLS

    Modern mould cooling with DMLS

    When ultra efficient and even cooling is required we recommend one of our latest technology […]


  • Tooling in 1 week

    Tooling in 1 week

    We understand the importance of a high speed to market. Perhaps you are working on […]


  • Understanding shrink rates

    Understanding shrink rates

    [ut_two_thirds] There are many factors that play a role in the shrinkage that you will […]


  • Choosing the optimum mould steel

    Choosing the optimum mould steel

    Choosing the optimum mould steel for best tooling and production economy. The choice of steel […]


  • Polished finishes

    Polished finishes

    So your customer has given you a surface finish value that you have to hit […]


  • Importing tools to Europe

    Importing tools to Europe

    At The Tool Hub we have many years of experience in imports and exports and […]


  • Transport terms

    Transport terms

    There are many INCO terms that can be used for transporting tools but the 3 […]


  • Live hinges

    Living hinges are thin sections of plastic that connect two segments of a part to […]